BOARDS Massive board range - All shapes, styles & designs.
WETSUITS Billabong, Ripcurl, Xcel, O'Neil, Quiksilver, Roxy. The Coast's largest range of mens, ladies and kids wetsuits!
Clothing, Watches, Shoes and Accessories. All the latest fashion trends for the whole family!
BODYBOARDING Huge range of bodyboards and bodyboarding accessories.
SURF ACCESSORIES The most comprehensive range of surf accessories under one roof including fins, leggys, grips, covers & heaps more.
Welcome to Surfers Choice
THE COASTS BIGGEST WETSUIT & SURFING ACCESSORY RANGE
The MOONRAKERR fin uses dimples located on the fin’s curved surfaces to create a turbulent flow. This turbulent flow draws the fluid back over the foil surface, reducing cavitation and drag during extreme changes of direction (high angles of attack) and at high speeds. A foil with dimples allows the surfer to create more drive and to maintain speed and hold through turns. This then increases the overall performance of the surfboard.
3D FINS AVAILABLE NOW AT SURFERS CHOICE
LOGAN TESTING THE NEW 3D FINS
THE COASTS BIGGEST STEAMER RANGE
FROM O'NEILL, RIPCURL, BILLABONG, QUIKSILVER, WEST, XCEL
DION AGIUS' SUPERcraft 2 SIGNATURE MODEL
He travels, he parties, he photographs, he designs sunglasses, and he has more fun than you. Even with all the traveling and wide variety of waves he rides, Dion’s constantly ordering his boards short and stout. The SUPERcraft 2 is just that. It’s built to suit his needs and let his imagination run amok. Maximum maneuverability and versatility—enjoy!
• Wide, curvy outline • Low smooth rocker • Deep, single concave from entry to the fins with slight double off the back end • 5 plug set up for Tri/Quad fin option • Wide Squash tail • Ride 4-5 inches shorter and ¾” - 1” wider than a normal shortboard
NEW BILLABONG LADIES "XERO REVOLUTION" STEAMER
FULL GBS WELDED SEAMS, 100% SUPERSTRETCH, CHEST ZIP STEAMER
RILEYS NEW "DYLAN" TOWBOARDS
(AVAILABLE AS CUSTOMS THRU SURFERS CHOICE)
"WEST WETSUITS AVAILABLE AT SURFERS CHOICE
NEW COLOURS NOW INSTORE OF GLOBE "GOODSTOCK" JEANS & CHINOS
NEW WINTER ARRIVALS
TEAGUE ROBINSON ON HIS NEW "SUPER" BRAND BOARD
SURFERS CHOICE TEAM RIDER
"ZOE IFIELD" WINS GOLD
AT THE SLS BRANCH SURFING TITLES
SURFERS CHOICE TEAM RIDER
"RILEY LAING" MAKES
"HOT 100 MOVIE"
TOM CARROL 6'6" WAS $399.95 NOW $279.95
NEW TEAMRIDER "LOGAN STEINWEDE"
BANANA WAX AVAILABLE AT SURFERS CHOICE
FREE HOODED TOWEL WITH ALL RIPCURL STEAMERS (WHILE STOCKS LAST)
Team Rider & young charger ZOE IFIELD cleaned up at the Adrenalin surf comp at Avalon
Girls u/16 surfing 1st ,2nd Skate
u/16 Girls Queen of Surf & Skate
TEAMRIDER "WADE CLEMENS"
From the Ultimate range of wetsuits
For the Surfer who wants the best wetsuit possible. No compromises. Constructed with the most advanced neoprene and loaded with the latest ocean technology.
Two engineered layers that funnel water radiply out of the suit making it the warmest and most comfortable lining available.
ALL NEW E4 NEOPRENE
30% More Stretch 20% Less Weight 10% Warmer
E4 TAPED SEAMS
Allows for maximum seam stretch while giving ultimate sealing and comfort.
RIPCURLS NEW "E4" FLASHBOMB FOR WINTER 2013 IN STORE NOW
"FREE RIPCURL PONCHO WITH EVERY RIPCURL MENS WETTY"
NEW BOYS "E4" FLASHBOMB STEAMERS IN STORE NOW
The NSP Elements Fish is a durable small wave thruster designed to maximize the amount of fun you can have in the surf.
This board features a modern fish outline and enough volume to get into waves early, while still providing the freedom to perform maneuvers with minimal effort. The smooth relaxed rocker has extra flip in the nose allowing you to drop into hollow waves with confidence then quickly generate speed.
Single concave in the nose flattens out through the centre, and then transitions into vee through the back of the board. This combination of bottom contours is ideal for generating speed down the line, and making fast rail-to-rail turns in more critical sections.
The NSP Elements Fish has a swallowtail with a hip positioned adjacent to the trailing edge of the side fins; this reduces the area under your back foot and enhances the board's ability to turn in a much tighter radius. Boxy-full rails also add to the overall forgiveness of this model.
The NSP Elements Fish is constructed from secure cell, fully fused EPS foam that's laminated and vacuum molded with a combination of high grade fiberglass and epoxy resin. A durable polyurethane coating is integrated within the mould and then completed with a performance hybrid finish.
Like the name suggests, NSP Elements Funboards are designed to make surfing easy and provide endless hours of fun and enjoyment in the ocean.
These boards are modeled off traditional longboards and feature a full nose, rounded pintail, and a generous well-balanced outline that's both stable and responsive in a variety of surf conditions.
The smooth relaxed rocker on the NSP Elements Funboard range features a little extra flip in the nose allowing you to paddle into waves with ease and confidently drop down the face without fear of nose diving. The vee bottom has been designed to maximize speed while allowing the board to turn and transition from rail-to-rail with minimal effort. A boxy full rail also adds to the overall forgiveness of these boards.
The NSP Elements Funboards are constructed from secure cell, fully fused EPS foam that's laminated and vacuum molded with a combination of high grade fiberglass and epoxy resin. A durable polyurethane coating is integrated within the mould and then completed with a performance hybrid finish.
The 8'2" Mini features a relaxed and neutral rocker profile that is fun but responsive while being easy to ride. The rounded square tail/thruster fin configuration is responsive and drives nicely off the bottom.
The 9'2" is your perfect longboard for anyone who wants a fun board that will last the tests of time. It's a classic shape that works well across the board. You can't go wrong with this model.
The NSP Elements Longboards are constructed from secure cell, fully fused EPS foam that's laminated and vacuum molded with a combination of high grade fiberglass and epoxy resin. A durable polyurethane coating is integrated within the mould and then completed with a performance hybrid finish.
NEW KIDS "E4" FLASHBOMB AVAILABLE NOW IN STORE
TEAMRIDER "RILEY LAING"
TEAMRIDER "TEAGUE ROBINSON"
TEAMRIDER "JORDON CONSTANTINOU"
TEAMRIDER "RILEY LAING"
New stock of SCARFINI FINS in store now (FCS & FUTURES - thrusters & quads)
YOUNG UP AND COMING CHARGER "LOGAN STEINWEDE"
Lockable Tie Down straps (3 sizes - 2.5m, 3.3m , 4.0 m)
TEAM RIDER "WADE CLEMENS" PICKS UP "SCARFINI " FIN SPONSORSHIP
AWESOME FINS AT AWESOME PRICES
AVAILABLE IN STORE AT SURFERS CHOICE
SCARFINI FINS AVAILABLE IN FCS OR FUTURES SET UP
INTRODUCING THE NEW "JORDY SMITH " FIN FROM FUTURE FINS
Height: 4.73 in, 12.01 cmBase: 4.77 in, 12.12 cmArea: 16.11 sq in, 103.94 sq cm
Jordy grew up in a surfboard factory. He followed his dad around the shop, taking on knowledge about surfboard design before he could even ride one. Performance is innate in Jordy, and 20 years later he's a stickler for detail. This fin represents Jordy's in depth knowledge of his equipment and his ability to translate a feeling into a description for our engineers to work from. The large area suits Jordy's big frame perfectly. Featuring a wider base and thinner tip, the template has laid back lines, accentuating Jordy's effortless approach to a tee. Powerful performance designed to win an ASP World Championship.
ThE NEW "MF-2" MICK FANNING FINS
Mick Fanning's signature MF-2 features the same construction, foil, and outline as the MF-1 but on a smaller template. This medium size fin has a dynamic flex, is ideal for long arc turns and is designed for high performance surfing
Features › Lightweight fin with remarkable flex › Smooth feel and impressive aesthetic › Base: 4.50" / 110mm › Depth: 4.50" / 114mm › Area: 14.62"2 / 9434mm2 › Sweep: 35.9° › Foil: flat
being the youngest person to ever tow in at SHIPSTERNS in Tasmania
New CLAY MARZO "MADNESS 2" from SUPER in store now
"SCARFINI " FINSNOW INSTORE
Ridden by JOHN JOHN FLORENCE
NEW CREATURES LEGGYS
New FUTURES "CTG" Fins
Height: 4.25 in, 10.80 cm Base: 4.06 in, 10.31 cm Area: 13.00 sq in, 83.87 sq cm
The CTG is an upright pivoting fin for groms, small riders and light-weight surfers.
New FUTURES "MB2"Fins
MB2 - Matt Biolos
Height: 4.65 in, 11.81 cm Base: 4.50 in, 11.43 cm Area: 15.47 sq in, 99.81 sq cm
When designing this fin, Matt Biolos wanted to develop something with Futures that was a progressive take on fin design that picks up where glass-ons leave off.
"I like flat inside foils because they mimic glass-on fins and I feel that flat sided fins feel more neutral and thus allow you to 'ride the board...not the fins'... The MB2 features a carbon base that is scheduled (placed) to mimic the "football" shaped glass patches we use to glass fins onto boards."
Jeremy Flores' signature fin featuring a long base and narrow tip. Perfect for driving hard off the bottom and snapping vertically off the top. Subtle tip flex provides smooth transitions between turns.
FCS RELEASES THE FCS VS KNUBSTER
Following Kelly Slater’s phenomenal 11th World Title victory, FCS is pleased to announce the release of the FCS VS KNUBSTER. Regarded by many as Kelly’s secret weapon during the second half of the 2011 ASP season, this specialised quad centre fin is now available to surfers around the globe.
Developed by Sean Mattison for Von Sol surfboards, the FCS VS KNUBSTER is essentially a centre fin that can be added to any quad set-up. The fin will increase drive and provide directional control through turns, without sacrificing speed, flow, or the freedom of movement typically associated with a quad.
The “KNUBSTER” is designed with a single tab that allows the fin to be positioned in the forward and rear centre plug to cater for the individual drive requirements of each surfer.
The FCS VS KNUBSTER, which is 3 3/4” by 2” high, was the 5th fin Kelly Slater used in his boards during the Quiksilver Pro in New York. According to Kelly’s report, “The KNUBSTER makes your quad set-up feel faster, smoother, and it adds a little more control. It just tightens everything it up a bit”.
Interestingly Kelly was riding the FCS VS KNUBSTER when he scored his two 10 point rides in 2011. The first at the Quiksilver Pro in NY where he performed one of the best airs ever seen in competition, and the second at The Rip Cur Pro in Portugal in heaving barrels.
Adding the FCS VS KNUBSTER to your quad set-up is an affordable way to add a new dimension to your surfing. FCS recommends using the fin with the FCS K2.1 Quad.
FCS Gerry Lopez SUP Tri-Quad Fin Set
With the GL Tri-Quad SUP fin set, Gerry Lopez and FCS Fins teamed up to create an ideal tri-quad set for SUP stand up paddleboards. This 5 fin set gives the surfer a choice of a thruster fin set-up, or a Quad. These are the most popular fin set-ups for top pro longboard surfers, and thus it's a good bet for use in high-performance stand up paddle surfing as well. All stand up paddle boards have a longboard centre fin box, so this set includes one centre fin with a longboard fin box base and four fins with standard FCS Fins bases for the side bites/quad. These fin sets would also work great on a longboard as well as SUP. FCS Performance Core Construction Centre fin includes a Smart Screw fin bolt Gerry says- “Shaping my own boards of every kind since 1968, has impressed the critical importance of fin shape and design as equal to that of surfboard shape. Now SUP has arrived on the scene and removable fins are utilized on practically every board. I prefer the thruster and/or quad setups for my SUP surfing boards. Working with FCS, I've designed both a thruster set as well as a quad setup. So for wave riding, I think we got you covered. Keep paddling”.
PC-5 Longboard Centre Box Fin
PC-5 centre fin template designed to fit into a single fin box allowing surfers to convert a traditional 2 + 1 longboard set-up into a more contemporary thruster configuration.
Performance Core construction is designed to deliver the feeling of a traditional fiberglass fin with the added performance of reduced weight. The RTM (Resin Transfer Moulding) process produces a lightweight fin with remarkable flex, a smooth feel, and an impressive aesthetic.
BASE: 4.37" 111mm
DEPTH: 4.55" 115mm
Area: 14.76" 9525mm
Limited Edition Fins is pleased to announce the release of our two new fin mould sizes, Extra Small (XS) and Extra Large (XL).
These new Limited Edition fin moulds have been specifically designed to incorporate all the design features of our current Small, Medium, Medium Large, and Large moulds:-This initial release will incorporate 3 of our most sought after colour ways, The Matt Lackey (Black / Red), The Team Spec A (Black / Yellow), and the Team Spec B (Grey / Lime).
FK GRIPS & ACCESSORIES
Used by Surfers Choice Team riders Shane Holmes & Jordon constantinou
Research, Development, Passion The finest wax ingredients, the latest in wax traction technology and thousands of hours testing in the water are all part of the Far King commitment. Our passion for making the best waxes and surf accessories on the planet continues. As surfers most of us spend our lives chasing / waiting for the best surf. When it comes you can rely on Far king serious surf accessories.
"MG" SURFBOARDS-(check them out on our board page)
Surfers Choice is now the exclusive dealer on The Central Coast for "MG" SURFBOARDS shaped by Mauricio Gill & ridden by Surfers Choice Team Rider Shane Holmes
FUTURE FINS - "STAMP" 5 FIN SET
The Tim Stamps template is a balanced template designed for medium sized surfers. The medium tip and base allows you to stay on rail and makes it easy to generate your own speed.
FUTURE FINS - BLACK SIX 2.0 Introducing the Black Stix 2.0: Featuring Truss Tang Technology with a reinforced screw contact point, advanced chemically engineered resins, and a glass carbon fiber matrix for a precision flex pattern that releases energy at the apex of turns generating incredible lift and igniting your surfing
Height:4.56 in, 11.60 cm Base:4.50 in, 11.40 cm Area:14.84 sq in, 95.74 sq cm Our smaller template for medium sized light footed surfers. A solid base with small tip is perfect for a fast loose style. Try this laid back template in wrapping point breaks
Height:4.38 in, 11.10 cm Base:4.22 in, 10.70 cm Area:14.22 sq in, 91.74 sq cM
One of our most popular fins. A balanced template that performs in a variety of conditions. The medium base and tip help you generate your own speed and stay on rail.
CENTRAL COASTS EXCLUSIVE DEALER FOR DYLAN SURFBOARDS BY DYLAN LONGBOTTOM
ONE OF THE MOST HIGHLY REGARDED PROFESSIONAL FREESURFERS IN AUSTRALIA, DYLAN IS KNOWN FOR AMAZING BIG WAVE ANTICS AT SHIPSTERNS BLUFF OR HEAVY TAHITIAN BOMBS AT TEAHUPOO. AS ONE OF THE WORLDS TRUE ELITE SURFER/SHAPERS, DYLAN USES HIS DIRECT INFLUENCE & EXPERIENCE TO CREATE THE MOST FUNCTIONAL BOARDS HE CAN. WITH IT BEING A KNOWN FACT THAT HE SPENDS A LOT OF TIME TRAVELLING & TESTING HIS EQUIPMENT IN ALL CONDITIONS, YOU KNOW YOU CAN HAVE CONFIDENCE IN WHAT YOU'RE GETTING
Rob Machado signature fin
Rob Machado and Futures partnered up to design a fin that fuses cutting edge technology with environmentalism. The fin uses renewable, fast growing, bamboo that is both light and resilient coupled with carbon fiber to create a torsional flex pattern. The bamboo carbon matrix stores potential energy during turns to release it at the end with a burst of kinetic speed. They are made with quality epoxy resin instead of polyester; not only is Epoxy stiffer, lighter, and better performing, but epoxy is also stronger for a longer lasting life and releases less VOC's (Volatile Organic Compounds) than polyester resin. We believe these fins represent a step forward in decreasing the environmental impact of the RTM process while remaining Lightest, Strongest, Fastest.
Julian Wilson Signature Fin - JW-1
After much anticipation FCS is pleased to announce the release of Julian Wilson’s new signature fin, the JW-1. As fate would have it, the development of this fin coincided with the filming of Julian’s signature movie “Scratching the Surface”. The hectic travel itinerary meant Jules was able to test and refine his fin in a diverse range of waves. Once the template was locked down, Jules tried different foil options and constructions in order to achieve that ‘perfect flex’. In the end a traditional flat foil in Performance Glass construction prevailed. The final piece of the puzzle was to make the JW-1 pop, and steered by Julian’s recommendations, we arrived at the unmistakable aesthetic of solid orange neon framed with a black border.
The JW-1 is a medium size fin geared towards fast, aggressive surfing. The side fin template lends elements of Kelly Slater’s K2.1 and the FCS G-5, delivering fast pivotal surfing in critical sections. A slightly smaller centre fin template also triggers quick tail release. Jules rides this fin in everything from 1 foot to 4-6 foot. We asked him why surfers should ride his fin, his reply was; “This fin won’t hold you back, it’ll let you do everything you desire… if you can do it?”
NEW "MICK FANNING" SIGNATURE FINS
IN STORE NOW
KINETIK RACING FINS
Occy Signature Fin
Occy’s fin template is designed purely for speed and power. One of the most brutal and hard hitting surfers of all time. Occ likes strong, continuous speed gained from his fins rake. His ability to then turn hard and tight is allowed through a purposely designed template. Best suited to medium to heavy surfers or fast down the line walls.
CHECK OUT THE TEAM ON OUR TEAM PAGE
CHITTAWAY PHARMACY For all your surf travel medical needs & sporting supplements 02 43884722